This particular tray is made using reclaimed barn wood but the author of the project Beyond The Picket Fence surprised everyone with one fact: reclaimed barn wood has often some areas turned pink due to cow urine. If you check the project more closely, you’ll also notice some areas of the tray being almost bright pink. That’s something you don’t see every day!
Some tools required for this project are hole saw, drilling machine, pencil, tape measure, clamps, etc. This tutorial explains every step properly with images so that anyone can make a wooden sofa sleeve easily. Those, who prefer a video tutorial, can visit the below link to a YouTube video that illustrates the process of building a DIY Sofa Sleeve Cupholder.

In your kitchen, you really need a proper place to keep your knives. I found this online this knife stand with wood and it is very useful. You can keep your knives at a proper place by using this wall knife stand. A knife is a thing that you need repeatedly in the kitchen while making food. Especially for the ladies, it is very essential. I am sharing some of the pictures of this wall knife stand with you, have a look at them.
To teem your mind with some wood working project ideas we have scrolled down the web and assembled the best of them in the shape of these 32 DIY small wood working projects. From lots of furniture marvels to exquisite and fascinating decor pieces all have been included in the ideas so that you can choose the best for your house to build and enjoy natural and rustic vibes in your home sweet home so do take deep dive in the following sea of ideas.
These indoor photo frames got my attention when I was searching to some good wooden wall hangings. Easy to make and exciting photo frames are must have to decorate your walls and rooms with amazing pictures of your favorite moments. You can make these photo frames easily and can attach them to any wall inside your house for decoration and can save a lot of memorable pictures of your favorite moments.
A few days back, I was searching for some cool DIY plans. So, I got to work and ended up coming up with some easy to follow project and an awesome new ice chest cooler to have out on the deck! It was going to be perfect for summer hangouts and barbecues. It was a fun and practical plan to work on and I know you will have fun tackling select a design from this plan and start building your own. Enjoy learning how you can build a rustic cooler also sing the video tutorial and source tutorial plan!

Use compasses for make perfect circle for wood clock. There are many shops available which you can buy the hand made a wooden clock. Everybody has different taste so you can make clock according to your taste. It is really easy to follow video while making any DIY wood project. I also used to follow video for new ideas other videos are shown in this link.


Building a bookcase or bookshelf is a fairly simple woodworking plan that you can get done in just a day or two. This is also a low-cost project as well and since the project idea is free, you don't have to worry about busting through your budget. Just follow the simple steps in the tutorial and enjoy your own company building a simple bookcase on this weekend.
Working on one side at a time, glue and nail the side to the back. Apply glue and drive three 1-5/8-in. nails into each shelf, attach the other side and nail those shelves into place to secure them. Clamps are helpful to hold the unit together while you’re driving nails. Center the top piece, leaving a 2-in. overhang on both sides, and glue and nail it into place. Paint or stain the unit and then drill pilot holes into the top face of each side of the unit and screw in the hooks to hold your ironing board. Mount the shelf on drywall using screw-in wall anchors.
Drill four 5/8-in.-dia. 1/2-in.-deep holes on the large disc?inside the traced circle?then use 5/8-in. dowel centers to transfer the hole locations to the underside of the small disc. Drill four 1/2-in.-deep holes on the underside of the small disc and a 1/2-in.-deep hole in the center of the top for the dowel handle. Glue in the dowels to join the discs, and glue in the handle. We drilled a wood ball for a handle knob, but a screw-on ceramic knob also provides a comfortable, attractive grip.
×