A bottle carrier is a bucket like carrier used to carry beer bottles and so. Yes, the same one you must have used to carry your six-pack. Drinker or not, a bottle carrier is a useful item for everyone. It can be used to carry around or store small items around a household. And it is also very easy to build one. I have several of these lying around my house. Also known as wooden beer totes, this is one wood item you will absolutely love to make. It is also super easy to build.
We cut the supports 16 in. long, but you can place the second shelf at whatever height you like. Screw the end supports to the walls at each end. Use drywall anchors if you can’t hit a stud. Then mark the position of the middle supports onto the top and bottom shelves with a square and drill 5/32-in. clearance holes through the shelves. Drive 1-5/8-in. screws through the shelf into the supports. You can apply this same concept to garage storage. See how to build double-decker garage storage shelves here.
You can decorate your favorite areas and corners of your house by placing stylish wooden vases. These wooden items give a classy look to your interior furnishing. You can also make a wonderful variety of wooden vases easily at home. It is actually very easy and interesting to make. You must know you should have a bit of woodwork skills to do this innovative and exciting work. All you need are a few pieces of wooden boards, wood cutter, electric drill, hammer, screws, and plates. You can easily make these hanging wooden pots by joining equal size wooden pieces of square shapes. You can also do easily. This creative project is entertaining as well as good activity at the same time.
Surely, some practice and expertise are required to make this wooden dog bed for your dog. With proper learning, you can make it easily without spending much time and cost. Learn proper and make your dog the bed, he deserves. I made this item with another one so it was easy for me to build it with precision. You might need some practice, but it isn’t impossible to make.
This design is oh-so classy and beautiful and it’s one of the finest woodworking projects you’ll want to build today! You can display potted flowers, a cute clock, and a couple of picture frames on this DIY circular wood shelf. It’s effortlessly beautiful and easy to build! If you’re also looking for Mother’s Day crafts, you can include this on your list.
Begin by cutting off a 10-in. length of the board and setting it aside. Rip the remaining 38-in. board to 6 in. wide and cut five evenly spaced saw kerfs 5/8 in. deep along one face. Crosscut the slotted board into four 9-in. pieces and glue them into a block, being careful not to slop glue into the saw kerfs (you can clean them out with a knife before the glue dries). Saw a 15-degree angle on one end and screw the plywood piece under the angled end of the block.