At your home, there must be a proper place for keeping a guitar as you have to take it with you while going out. Normally you get desperate when you are not finding your guitar. You always have a fear of breaking that guitar. Have you ever heard about a guitar holder? I found this online it by myself because I was desperately finding a proper place for keeping my guitar. So, I am sharing some of the pictures with you. Have a look at them.
These 25 projects are absolutely stunning, to say the least. I would love to try out some of these designs all by myself and get started with some serious woodworking that I have been procrastinating for a long time. My favorites among these 25 are definitely the desk organizer, the bowling lane, and the tiered planter, but nevertheless, all are good in their own ways. I believe these projects only require hand tools and basic power tools like a rudimentary router and a jigsaw.
Cut off a 21-in.-long board for the shelves, rip it in the middle to make two shelves, and cut 45-degree bevels on the two long front edges with a router or table saw. Bevel the ends of the other board, cut dadoes, which are grooves cut into the wood with a router or a table saw with a dado blade, cross- wise (cut a dado on scrap and test-fit the shelves first!) and cut it into four narrower boards, two at 1-3/8 in. wide and two at 4 in.
Build this handy stool in one hour and park it in your closet. You can also use it as a step to reach the high shelf. All you need is a 4 x 4-ft. sheet of 3/4-in. plywood, wood glue and a handful of 8d finish nails. Cut the plywood pieces according to the illustration. Spread wood glue on the joints, then nail them together with 8d finish nails. First nail through the sides into the back. Then nail through the top into the sides and back. Finally, mark the location of the two shelves and nail through the sides into the shelves. Don’t have floor space to spare? Build these super simple wall-mounted shoe organizers instead!