You can also make amazing pieces of wooden art easily at home. Although you can imagine that this is only possible for a carpenter or woodcarver. But it is not. It is actually very easy to make one. You must know you should have a bit of woodwork skills to do this creative and interesting work. All you need are a few pieces of wooden planks, a saw, screws, and plates. You can easily make these hanging wooden pots by joining equal size wooden pieces of square shapes. I make this wooden plant pots at home easily and decorate with different kind of plants, especially seasonal flowers that give an amazing look to the wall. You can also do easily. This DIY project is fun and good activity of the same time.
I think this is my one of the best wood project because the uniqueness tells in it. You can make the Christmas tree with the different style all of you need a creative mind. You just need the exact material so that you can make a beautiful wood tree for Christmas purpose. If you want to make something delightful Christmas tree with the help of wood you need to watch this video. The step by step procedure of making a wooden tree is shown in this video.
The beauty of this project lies in the simplicity. All you need are 3 pieces of wood of your choice (though we must admit natural hardwoods will look incredible), sanding block, clamps, wood glue and finishing product. The hardest step of the whole tutorial is measuring – as always, measure 9 times, cut once! You wouldn’t want to finish your project and then realize it doesn’t have enough space to fit your DVD player, would you?
Here’s a traditional Swedish farm accessory for gunk-laden soles. The dimensions are not critical, but be sure the edges of the slats are fairly sharp?they’re what makes the boot scraper work. Cut slats to length, then cut triangular openings on the side of a pair of 2x2s. A radial arm saw works well for this, but a table saw or band saw will also make the cut. Trim the 2x2s to length, predrill, and use galvanized screws to attach the slats from underneath. If you prefer a boot cleaner that has brushes, check out this clever project.
With a pencil and a protractor, divide the larger disc into 30-degree wedges to create 12 center lines for the bottle indents. Center and trace the smaller disc on top of the larger disc. Next, with a drill press, drill 3/8-in.-deep holes on the 12 center lines with the 1-7/8-in. Forstner bit, spacing them between the disc’s outer edge and the traced circle. Next, divide the smaller disc into 60-degree wedges and drill six more 3/8-in.-deep holes with the Forstner bit.