This particular tray is made using reclaimed barn wood but the author of the project Beyond The Picket Fence surprised everyone with one fact: reclaimed barn wood has often some areas turned pink due to cow urine. If you check the project more closely, you’ll also notice some areas of the tray being almost bright pink. That’s something you don’t see every day!
The procedure is very easy to understand and follow for anyone with a little woodworking knowledge. Make sure to collect all the items you need before you start with the project. You may even ask Tracy your queries directly in the comment section of the tutorial post. Or you can ask them here. Either way, I hope that you manage to build this one nicely.

Begin by cutting off a 10-in. length of the board and setting it aside. Rip the remaining 38-in. board to 6 in. wide and cut five evenly spaced saw kerfs 5/8 in. deep along one face. Crosscut the slotted board into four 9-in. pieces and glue them into a block, being careful not to slop glue into the saw kerfs (you can clean them out with a knife before the glue dries). Saw a 15-degree angle on one end and screw the plywood piece under the angled end of the block.


This is the most interesting wooden item I have come across in recent times. I was searching for one for quite a while until I found this and I made one to hang in my garden. The birds visit it for playing along and it is very easy to make as well. I made mine in only 2 hours. You can also make it in the same time. Make one and save yourself a lot of cash.
Attention: Almost any do-it-yourself project involves risk of some sort. Your tools, materials, and skills will vary, as will the conditions at your project site. Reality Daydream has made every effort to be complete and accurate in the instructions of the plans on this website. Reality Daydream will not assume any responsibility or liability for damages or losses sustained or incurred in the course of your project or in the use of the item you create. Always follow the manufacturer's operating instructions in the use of tools, check and follow your local building codes, and observe all commonly accepted safety precautions.
You can also make amazing pieces of wooden art easily at home. Although you can imagine that this is only possible for a carpenter or woodcarver. But it is not. It is actually very easy to make one. You must know you should have a bit of woodwork skills to do this creative and interesting work. All you need are a few pieces of wooden planks, a saw, screws, and plates. You can easily make these hanging wooden pots by joining equal size wooden pieces of square shapes. I make this wooden plant pots at home easily and decorate with different kind of plants, especially seasonal flowers that give an amazing look to the wall. You can also do easily. This DIY project is fun and good activity of the same time.
Isn’t it amazing to have a set of table and stools in puzzle shape? I have such type of table and chairs at my home. I found this online these by myself. You can keep them in your dining room or drawing room according to your demand. It looks very nice and catchy and all your guests would definitely admire them. I am sharing the pictures of these tables and stools, you can have a look at them.
Hanging planters are a big hit nowadays so don’t let this opportunity of building your own DIY hanging planter pass! Learn the step-by-step instructions how to work a jigsaw and make this stunning planter to hang in your home to complement your furniture. You can hang it above your coffee table or put in flowers as a Valentine’s Day or Mother’s Day gift for your loved one.
These indoor photo frames got my attention when I was searching to some good wooden wall hangings. Easy to make and exciting photo frames are must have to decorate your walls and rooms with amazing pictures of your favorite moments. You can make these photo frames easily and can attach them to any wall inside your house for decoration and can save a lot of memorable pictures of your favorite moments.
Builder provides diversified content for builders - targeted to address how their businesses are doing. Builder sources are the best in the industry: the brightest, most esteemed economists, building scientists, and industry consultants. The greatest resource of all is other builders who provide real life, on the ground details about every aspect of their businesses, good and bad, and who offer their own experiences to help you when you need it.
For your kitchen, it can work as a knife rack. It gives you easy access to all essential tools while saving space. In addition, it adds a nice visual appeal to your kitchen wall. You can customize your wall rack with different materials, designs and styles. I am here sharing the source link to the step by step tutorial about how to make a rustic wall knife rack.

The procedure is very easy to understand and follow for anyone with a little woodworking knowledge. Make sure to collect all the items you need before you start with the project. You may even ask Tracy your queries directly in the comment section of the tutorial post. Or you can ask them here. Either way, I hope that you manage to build this one nicely.
Although refrigerators long ago rendered them obsolete, antique oak ice boxes remain popular with collectors, even though they’re expensive and hard to find. This do-it-yourself version is neither: it’s both inexpensive and easy to build. An authentic reproduction of an original, the project is especially popular when used as a bar, but it has many

Drill four 5/8-in.-dia. 1/2-in.-deep holes on the large disc?inside the traced circle?then use 5/8-in. dowel centers to transfer the hole locations to the underside of the small disc. Drill four 1/2-in.-deep holes on the underside of the small disc and a 1/2-in.-deep hole in the center of the top for the dowel handle. Glue in the dowels to join the discs, and glue in the handle. We drilled a wood ball for a handle knob, but a screw-on ceramic knob also provides a comfortable, attractive grip.

×