To start off this list of simple woodworking projects is a DIY sawhorse which will be very helpful to you if you don’t own a ShopBot Buddy. A sawhorse always comes in handy especially if you have more plans of woodworking in the future. Before you get started on this woodworking project, get one of these extension cords with built-in outlets for your power tools to help you out!
Begin by cutting off a 10-in. length of the board and setting it aside. Rip the remaining 38-in. board to 6 in. wide and cut five evenly spaced saw kerfs 5/8 in. deep along one face. Crosscut the slotted board into four 9-in. pieces and glue them into a block, being careful not to slop glue into the saw kerfs (you can clean them out with a knife before the glue dries). Saw a 15-degree angle on one end and screw the plywood piece under the angled end of the block.
With a pencil and a protractor, divide the larger disc into 30-degree wedges to create 12 center lines for the bottle indents. Center and trace the smaller disc on top of the larger disc. Next, with a drill press, drill 3/8-in.-deep holes on the 12 center lines with the 1-7/8-in. Forstner bit, spacing them between the disc’s outer edge and the traced circle. Next, divide the smaller disc into 60-degree wedges and drill six more 3/8-in.-deep holes with the Forstner bit.
A super simple iPad Dock/stand made out of a single block of wood features an angled groove which gets to support the tablet device and a cut in a hole to revise access to the home button of your iPad. It’s possible to drill an access channel in the stand through which you can run a charging cable, although this mini stripped back iPad stand may have very limited functions.

Cut the 6-1/2-in. x 3-in. lid from the leftover board, and slice the remaining piece into 1/4-in.-thick pieces for the sides and end of the box. Glue them around the plywood floor. Cut a rabbet on three sides of the lid so it fits snugly on the box and drill a 5/8-in. hole for a finger pull. Then just add a finish and you’ve got a beautiful, useful gift. If you don’t have time to make a gift this year, consider offering to do something for the person. You could offer to sharpen their knives! Here’s how.

Use compasses for make perfect circle for wood clock. There are many shops available which you can buy the hand made a wooden clock. Everybody has different taste so you can make clock according to your taste. It is really easy to follow video while making any DIY wood project. I also used to follow video for new ideas other videos are shown in this link.


Surely, some practice and expertise are required to make this wooden dog bed for your dog. With proper learning, you can make it easily without spending much time and cost. Learn proper and make your dog the bed, he deserves. I made this item with another one so it was easy for me to build it with precision. You might need some practice, but it isn’t impossible to make.
Furthermore, a lot of data can be gathered from the internet. So, here I am sharing some of the pictures with you from the internet. You can select the pictures of the knife stand which you think is the best one. It’s up to you to that which wall knife stand you select. You can then start your project and it is not a very difficult task to manage. So, have a look at these pictures and make up your mind.
From the image above it seems that you do not require a big tutorial to help you to build this candle holder. All you need is a wood panel, a hook and some nails/screws and do exactly what you see in the picture. Attach the hook to the wood panel using two screws and then, attach the panel to the wall using more nails or screws. That’s it. I hope this gets the job done.
A few days back, I was searching for some cool DIY plans. So, I got to work and ended up coming up with some easy to follow project and an awesome new ice chest cooler to have out on the deck! It was going to be perfect for summer hangouts and barbecues. It was a fun and practical plan to work on and I know you will have fun tackling select a design from this plan and start building your own. Enjoy learning how you can build a rustic cooler also sing the video tutorial and source tutorial plan!
Just as a bit of an aside, I’m fairly new to woodworking and I’ve been looking into some CNC routers for cutting for these projects. I came across something interesting. The guy on this page claims to have put together a homemade CNC router for less than $300. I’m curious to know what you think about it. If you’ve never heard of it and don’t have an opinion, then no problem; I thought I’d ask anyway.
​Every project needs some tools and material to build on. The tools and material you will need in this plan include Miter saw, jigsaw, measuring tape screws and screwdriver etc. We will suggest you take high-quality material for the plan. Read the source tutorial and watch the video tutorial below for more details. Follow all the steps properly to make a nice and strong Rustic cooler. The tutorial explains the procedure for building this awesome gift. Make sure to use the only high-quality material for any woodworking project.
Use compasses for make perfect circle for wood clock. There are many shops available which you can buy the hand made a wooden clock. Everybody has different taste so you can make clock according to your taste. It is really easy to follow video while making any DIY wood project. I also used to follow video for new ideas other videos are shown in this link.
Wall-mounted or placed on a table or countertop, this handsome display cabinet is the perfect way to share any collection while keeping it clean and protected at the same time. Featuring tempered glass doors and three shelves, the cabinet’s design calls for all straight cuts and straightforward construction techniques (simple cut-outs give the effect of
These indoor photo frames got my attention when I was searching to some good wooden wall hangings. Easy to make and exciting photo frames are must have to decorate your walls and rooms with amazing pictures of your favorite moments. You can make these photo frames easily and can attach them to any wall inside your house for decoration and can save a lot of memorable pictures of your favorite moments.
The concept of making this DIY wood art comes from the Christmas tree. This Christmas tree has five layers it depends on you that what things you are choosing to decorate this wooden Christmas tree. I wanted to make something unique in Christmas see my hardworking comes true. This Christmas tree is made from wood; the step of making this Christmas tree is really easy that you can also try it. You can put many decorative things in it. You can see the full image of this wooden tree.
Build your own platform bed frame at your home by following the source linked tutorial given above. The source link also includes more pictures that can help you to build a better bed frame. You can see a step by step set of instructions and guidelines to follow with real life pictures, as well as you can download a PDF file detailing the list of materials and tools you’ll need, know about the length of every board, and most importantly color-coded illustrations of the building process.
Perfectly customizable for any home bar or kitchen, wooden coasters are incredibly easy to make and perfect for the beginner craftsman or craftswoman. All it really takes is some precise (or imprecise, depending on the style you wish to achieve) cuts, a little to a lot of sanding, a tiny bit of finish, and the optional design you want on the coaster.
This particular tray is made using reclaimed barn wood but the author of the project Beyond The Picket Fence surprised everyone with one fact: reclaimed barn wood has often some areas turned pink due to cow urine. If you check the project more closely, you’ll also notice some areas of the tray being almost bright pink. That’s something you don’t see every day!
Build this handy stool in one hour and park it in your closet. You can also use it as a step to reach the high shelf. All you need is a 4 x 4-ft. sheet of 3/4-in. plywood, wood glue and a handful of 8d finish nails. Cut the plywood pieces according to the illustration. Spread wood glue on the joints, then nail them together with 8d finish nails. First nail through the sides into the back. Then nail through the top into the sides and back. Finally, mark the location of the two shelves and nail through the sides into the shelves. Don’t have floor space to spare? Build these super simple wall-mounted shoe organizers instead!
×