Now a day, it is not difficult to decorate your living places. We can decorate walls with beautiful and attractive wooden hangings. I am actually making one of this wooden plants hanging in my home. It is totally cool and creative work. We can make these eye-catching wooden plant hangings at home easily by using some common tools. This is the easiest way to spice up your walls. By doing this you can give style to your walls as well as mention your address on it.
The items you’ll need for this project include wood board, power drill, tape measure, adhesive, etc. Read the tutorial for details. Follow the steps properly to make a nice and strong wall rack. This rack makes use of magnets to hold metal items. The tutorial explains the procedure for building this beautiful wall rack. Make sure to use only high quality items for any woodworking project. Use the rack only to hang items that are not too heavy for the magnet to hold. Also, be careful while working around this wall rack and beware of the knives falling off the rack.
Use compasses for make perfect circle for wood clock. There are many shops available which you can buy the hand made a wooden clock. Everybody has different taste so you can make clock according to your taste. It is really easy to follow video while making any DIY wood project. I also used to follow video for new ideas other videos are shown in this link.
Just make sure to use non-toxic wood and non-toxic finishes like Raw Linseed Oil or Carnauba Wax so that dangerous chemicals from other woods and finishes doesn’t contaminate the food that goes onto the cutting board. You can also opt to include an indent for the knife, so the chef can put the knife into the cutting board when the knife is not currently in use.
This is the most interesting wooden item I have come across in recent times. I was searching for one for quite a while until I found this and I made one to hang in my garden. The birds visit it for playing along and it is very easy to make as well. I made mine in only 2 hours. You can also make it in the same time. Make one and save yourself a lot of cash.
Drill four 5/8-in.-dia. 1/2-in.-deep holes on the large disc?inside the traced circle?then use 5/8-in. dowel centers to transfer the hole locations to the underside of the small disc. Drill four 1/2-in.-deep holes on the underside of the small disc and a 1/2-in.-deep hole in the center of the top for the dowel handle. Glue in the dowels to join the discs, and glue in the handle. We drilled a wood ball for a handle knob, but a screw-on ceramic knob also provides a comfortable, attractive grip.
×