This time I surprised one of my favorite dice games and took it outside. I made a set of wooden dice in just a few hours, and instead of sitting in the room and doing nothing, we are taking our dice game out into the yard. With this set of wooden dice, dice games are becoming our favorite backyard game. Check out the step by step tutorial below so you can make your own.
Just make sure to use non-toxic wood and non-toxic finishes like Raw Linseed Oil or Carnauba Wax so that dangerous chemicals from other woods and finishes doesn’t contaminate the food that goes onto the cutting board. You can also opt to include an indent for the knife, so the chef can put the knife into the cutting board when the knife is not currently in use.
Need a place to store those beautiful flowers from a loved one or personal garden, but not a big fan of the giant, antique vase? I strongly recommend making a bottle vase holder! These easy to design, easy to make bottle vase holders are the perfect starter project for anyone new to the world of woodworking and looking for a project to help get them off the ground.
Here’s a traditional Swedish farm accessory for gunk-laden soles. The dimensions are not critical, but be sure the edges of the slats are fairly sharp?they’re what makes the boot scraper work. Cut slats to length, then cut triangular openings on the side of a pair of 2x2s. A radial arm saw works well for this, but a table saw or band saw will also make the cut. Trim the 2x2s to length, predrill, and use galvanized screws to attach the slats from underneath. If you prefer a boot cleaner that has brushes, check out this clever project.
Build this handy stool in one hour and park it in your closet. You can also use it as a step to reach the high shelf. All you need is a 4 x 4-ft. sheet of 3/4-in. plywood, wood glue and a handful of 8d finish nails. Cut the plywood pieces according to the illustration. Spread wood glue on the joints, then nail them together with 8d finish nails. First nail through the sides into the back. Then nail through the top into the sides and back. Finally, mark the location of the two shelves and nail through the sides into the shelves. Don’t have floor space to spare? Build these super simple wall-mounted shoe organizers instead!
×