Attention: Almost any do-it-yourself project involves risk of some sort. Your tools, materials, and skills will vary, as will the conditions at your project site. Reality Daydream has made every effort to be complete and accurate in the instructions of the plans on this website. Reality Daydream will not assume any responsibility or liability for damages or losses sustained or incurred in the course of your project or in the use of the item you create. Always follow the manufacturer's operating instructions in the use of tools, check and follow your local building codes, and observe all commonly accepted safety precautions.


By video tutorial, you will get step by step process instructions of making a nice wooden folding sling chair from scratch. However, my first wooden chair was not the best one, but it was good enough to motivate me to make some more folding chairs like this one. If I can make this, you too can make one yourself. You can browse the internet for more folding sling chairs ideas and start making one now.

Begin by cutting off a 10-in. length of the board and setting it aside. Rip the remaining 38-in. board to 6 in. wide and cut five evenly spaced saw kerfs 5/8 in. deep along one face. Crosscut the slotted board into four 9-in. pieces and glue them into a block, being careful not to slop glue into the saw kerfs (you can clean them out with a knife before the glue dries). Saw a 15-degree angle on one end and screw the plywood piece under the angled end of the block.
In the kitchen usually, there are many of the items or decorative materials to be displayed. You always are in search of some new products to decorate on the slab of the kitchen for good impressions. I found this online a totally new and classy looking bottle vase which is made of wood for your decorated kitchen and dining decoration. It’s really an outstanding idea to keep that bottle vase on the dining table. You would find no difficulty in making it. I am sharing some of the pictures so have a look at them.
As soon as I came across this tutorial, I didn’t wait any longer to start building one. Some of the items you need for this project are hardwood plywood, saw, glue, nails, drilling machine, etc. The video is very easy to follow for anyone with basic woodworking knowledge and experience. The first source link also includes a step by step procedure in plain English for those, who are not comfortable enough with the video tutorial.

Nightstands are nearly almost as important as the headboard of a mattress when it comes to a bedroom. They are absolutely perfect for placing lamps and novels for that late night reading, an alarm clock to remind you when it should be time to start your day, and for that nice, coaxing mug of sleepy time tea when you decide it is time to start winding down.

Perfectly customizable for any home bar or kitchen, wooden coasters are incredibly easy to make and perfect for the beginner craftsman or craftswoman. All it really takes is some precise (or imprecise, depending on the style you wish to achieve) cuts, a little to a lot of sanding, a tiny bit of finish, and the optional design you want on the coaster.


The article explains step by step process for making this awesome piece of wooden art. Although it looks like a job for an intricate carpenter or woodcarver. But it is not. It is actually very easy to make one. All you need are a few pieces of wooden planks, a saw, screws, and plates. I must remind you here that a bit of woodworking skill is needed here too. So if it’s your first rodeo in carpentry, you might need some help from someone experienced. This DIY project is fun and a good sport at the same time. It is as easy on the eyes as it is to build one. If you don’t fancy writing instructions, here’s a video to help you understand its making.
Begin by cutting off a 10-in. length of the board and setting it aside. Rip the remaining 38-in. board to 6 in. wide and cut five evenly spaced saw kerfs 5/8 in. deep along one face. Crosscut the slotted board into four 9-in. pieces and glue them into a block, being careful not to slop glue into the saw kerfs (you can clean them out with a knife before the glue dries). Saw a 15-degree angle on one end and screw the plywood piece under the angled end of the block.
×