In your home, you are always in search of a rectangle shaped rack. In this rack, you can keep your books and some other material inside. You can also keep a photo frame inside it. I found this online such type of a rack by myself to keep my things in a right place. This way, your valuable items and accessories cannot be misplaced. Let’s have a look at the pictures mentioned below.
Build this handy stool in one hour and park it in your closet. You can also use it as a step to reach the high shelf. All you need is a 4 x 4-ft. sheet of 3/4-in. plywood, wood glue and a handful of 8d finish nails. Cut the plywood pieces according to the illustration. Spread wood glue on the joints, then nail them together with 8d finish nails. First nail through the sides into the back. Then nail through the top into the sides and back. Finally, mark the location of the two shelves and nail through the sides into the shelves. Don’t have floor space to spare? Build these super simple wall-mounted shoe organizers instead!
Wood is like the second love for the craft lovers, carpenters and also for the DIYers as it proves to be a very functional and gorgeous source of home improvement projects letting you attain your desirable furniture range and also some decor pieces out of it. the reason for much love for the wood is that it is so natural and accent to create some charming and rustic appealing la outs with the extreme durability along with. And if you can find some salvaged wood in any form in your surroundings, than it would be like icing on cake as you can then possess wood crafts at no cost at all as compared to the hefty priced market items.
Why would you buy a costly platform bed from Ikea or somewhere else when you can make one yourself at home? Oh yes, you can. A bed is the most common furniture piece used in the house and probably the costliest one. Wouldn’t it be great if you could just make a bed of your own, without having to spend many bucks for buying one? So I am here sharing a great tutorial to help you to build a nice comfy platform bed that you can use anywhere in the house.
Working on one side at a time, glue and nail the side to the back. Apply glue and drive three 1-5/8-in. nails into each shelf, attach the other side and nail those shelves into place to secure them. Clamps are helpful to hold the unit together while you’re driving nails. Center the top piece, leaving a 2-in. overhang on both sides, and glue and nail it into place. Paint or stain the unit and then drill pilot holes into the top face of each side of the unit and screw in the hooks to hold your ironing board. Mount the shelf on drywall using screw-in wall anchors.
The article explains step by step process for making this awesome piece of wooden art. Although it looks like a job for an intricate carpenter or woodcarver. But it is not. It is actually very easy to make one. All you need are a few pieces of wooden planks, a saw, screws, and plates. I must remind you here that a bit of woodworking skill is needed here too. So if it’s your first rodeo in carpentry, you might need some help from someone experienced. This DIY project is fun and a good sport at the same time. It is as easy on the eyes as it is to build one. If you don’t fancy writing instructions, here’s a video to help you understand its making.
You can transfer a graphic on any wood piece of your choice, including a frame, top of a table, etc. The surface should be clean and big enough for the graphic paper. I am also sharing a video tutorial here that explains in detail the process of transferring any graphic to a wooden surface using a freezer paper. Just gather the items you need and follow this video to carve your favorite designs on your favorite wood items.
Begin by cutting off a 10-in. length of the board and setting it aside. Rip the remaining 38-in. board to 6 in. wide and cut five evenly spaced saw kerfs 5/8 in. deep along one face. Crosscut the slotted board into four 9-in. pieces and glue them into a block, being careful not to slop glue into the saw kerfs (you can clean them out with a knife before the glue dries). Saw a 15-degree angle on one end and screw the plywood piece under the angled end of the block.