Do you want to use an oil stain, a gel stain, a water-based stain or a lacquer stain? What about color? Our ebook tells you what you really need to know about the chemistry behind each wood stain, and what to expect when you brush, wipe or spray it on. It’s a lot simpler than you think! This is the comprehensive guide to all the varieties of stain you will find at the store and how to use them.
I built my first platform bed by following the steps mentioned in the tutorial and the end result was everything I expected. It was as beautiful as comfortable and strong. It only cost me around $60 to build this one from the scratch. And if I can build it, anyone can. What you need is a little bit of woodworking experience and a lot of confidence. Collect the items as suggested in the video and start working now.
Make It: Have your child paint 10 craft sticks and allow them to dry. Put a line of glue on the back of five sticks. Sandwich a piece of string between a glued stick and an unglued stick; clip them with clothespins to hold the glue securely. Let dry. Run glue along an unpainted craft stick, lay it horizontally and stick on the five strings as shown (don't let the sticks hang too low or they'll tangle in the wind). Top with another unpainted stick and add clothespins to hold the glue securely. Once dry, tie the strings together and cut off the excess. Hang outdoors and let the wind do its work.

To start off this list of simple woodworking projects is a DIY sawhorse which will be very helpful to you if you don’t own a ShopBot Buddy. A sawhorse always comes in handy especially if you have more plans of woodworking in the future. Before you get started on this woodworking project, get one of these extension cords with built-in outlets for your power tools to help you out!


There’s a lot of space above the shelf in most closets. Even though it’s a little hard to reach, it’s a great place to store seldom-used items. Make use of this wasted space by adding a second shelf above the existing one. Buy enough closet shelving material to match the length of the existing shelf plus enough for two end supports and middle supports over each bracket. Twelve-inch-wide shelving is available in various lengths and finishes at home centers and lumberyards.
The best thing about this wine rack is that it is very easy to build. All you need is the basic understanding of woodworking and a few tools to get started. You can modify your wine rack any way you want or build in a design or color different from this one. The basic steps to build a wooden wine rack are the same for all variants. I have included here the video tutorial that I followed in order to build myself a pallet wide rack.
The concept of making this DIY wood art comes from the Christmas tree. This Christmas tree has five layers it depends on you that what things you are choosing to decorate this wooden Christmas tree. I wanted to make something unique in Christmas see my hardworking comes true. This Christmas tree is made from wood; the step of making this Christmas tree is really easy that you can also try it. You can put many decorative things in it. You can see the full image of this wooden tree.
An excellent introduction to woodworking is to use crates as your main material. The boxes are already formed, which means less assembly work for you—yet it looks impressive once your project is altogether. With this crate coffee table, you still get to practice your skills adding the casters and the center box. Finish with a little stain, and this table is ready to roll. You can find the full tutorial at DIY Vintage Chic. 
Furnishing and decorating your patio is not an easy task – but then again, it has to be done! Your patio is obviously one of the most important rooms in your home, as you can easily turn it into your little piece of Heaven, your “safe spot” in your home where you can retreat whenever you want to ignore the world and just spend some time alone all by yourself.
Make It: Paint four clothespins and a paper bowl red; paint two large wooden beads white. Glue eight thin 4-inch strips of red cardstock around the edge of the bowl to make legs; when dry, fold them in the middle for dimension. Glue the clothespins together as shown and adhere them to the front of the crab. Glue on the eyes and draw or cut out a mouth from black cardstock and attach. Complete the crab by punching a hole on each side; attach elastic cords to fit your child's head.
The beauty of this project lies in the simplicity. All you need are 3 pieces of wood of your choice (though we must admit natural hardwoods will look incredible), sanding block, clamps, wood glue and finishing product. The hardest step of the whole tutorial is measuring – as always, measure 9 times, cut once! You wouldn’t want to finish your project and then realize it doesn’t have enough space to fit your DVD player, would you?

This project is so easy and it is included in one of my favorite DIY wood projects. I used pallet wood to create a cup hanging. I put this in my kitchen and it was so helpful to me that I find my favorite cup instantly and could not need enough time. I think everybody feels trouble to find their favorite cup that is the main reason of making this wood project. You can see the full image of this cup hanging stand here is the link


The article explains step by step process for making this awesome piece of wooden art. Although it looks like a job for an intricate carpenter or woodcarver. But it is not. It is actually very easy to make one. All you need are a few pieces of wooden planks, a saw, screws, and plates. I must remind you here that a bit of woodworking skill is needed here too. So if it’s your first rodeo in carpentry, you might need some help from someone experienced. This DIY project is fun and a good sport at the same time. It is as easy on the eyes as it is to build one. If you don’t fancy writing instructions, here’s a video to help you understand its making.
I think the clock is an important element in your home because it tells the correct time. If you want to go anywhere you need to follow your clock so that you can be punctual as I am. I try to make something different with the help of wood that’s why I make the wood clock. You can see in this image that how beautifully the clock looks. Don’t color the wood because if you paint the clock glow of wood can be customized and you are not able to see the taste of wood.

Working on one side at a time, glue and nail the side to the back. Apply glue and drive three 1-5/8-in. nails into each shelf, attach the other side and nail those shelves into place to secure them. Clamps are helpful to hold the unit together while you’re driving nails. Center the top piece, leaving a 2-in. overhang on both sides, and glue and nail it into place. Paint or stain the unit and then drill pilot holes into the top face of each side of the unit and screw in the hooks to hold your ironing board. Mount the shelf on drywall using screw-in wall anchors.
×