We will suggest you select the simple Birdhouse if you are new at woodworking but be sure to select its design with respect to the place where you are going to hang/place it. One of our simple Birdhouse tutorials will help you building one. We have managed to include a source tutorial below that will help you to understand illustrates and the instruction to building a simple Birdhouse.
You can decorate your favorite areas and corners of your house by placing stylish wooden vases. These wooden items give a classy look to your interior furnishing. You can also make a wonderful variety of wooden vases easily at home. It is actually very easy and interesting to make. You must know you should have a bit of woodwork skills to do this innovative and exciting work. All you need are a few pieces of wooden boards, wood cutter, electric drill, hammer, screws, and plates. You can easily make these hanging wooden pots by joining equal size wooden pieces of square shapes. You can also do easily. This creative project is entertaining as well as good activity at the same time.
Just make sure to use non-toxic wood and non-toxic finishes like Raw Linseed Oil or Carnauba Wax so that dangerous chemicals from other woods and finishes doesn’t contaminate the food that goes onto the cutting board. You can also opt to include an indent for the knife, so the chef can put the knife into the cutting board when the knife is not currently in use.
This project is so easy and it is included in one of my favorite DIY wood projects. I used pallet wood to create a cup hanging. I put this in my kitchen and it was so helpful to me that I find my favorite cup instantly and could not need enough time. I think everybody feels trouble to find their favorite cup that is the main reason of making this wood project. You can see the full image of this cup hanging stand here is the link

Build this handy stool in one hour and park it in your closet. You can also use it as a step to reach the high shelf. All you need is a 4 x 4-ft. sheet of 3/4-in. plywood, wood glue and a handful of 8d finish nails. Cut the plywood pieces according to the illustration. Spread wood glue on the joints, then nail them together with 8d finish nails. First nail through the sides into the back. Then nail through the top into the sides and back. Finally, mark the location of the two shelves and nail through the sides into the shelves. Don’t have floor space to spare? Build these super simple wall-mounted shoe organizers instead!
×