Isn’t this amazing that instead of having to throw that old furniture piece away, you can now reuse it to build something even more beautiful? If you do not like this particular idea, there are many other re-purposeful furniture items you can build from an old dresser. Just search the internet for other DIY project ideas. Here is a link to the video tutorial that explains the same procedure in a more practical manner that you can easily follow through.
This tutorial shows the making of a wooden bookshelf with one of the easiest ways. I make this wooden stylish bookshelf at home easily and decorate with the variety of books that give a fabulous look to my room. You can also make it by using basic tools like woodcutters, hammer, drill and measuring tape. I made it at home for my creativity in easy steps. It is actually very easy and interesting to make. Size, shape, design and number of shelving is according to your choice when you made it.
Let’s take it up a notch and start building something more serious. This project may take more than just a few hours to complete, but the final item would be worth it as you can see in the image. It is a beautiful entryway table with drawers made entirely from scrap pallet wood. You can make one yourself by following the instructions from the picture.
Make It: Have your child paint 10 craft sticks and allow them to dry. Put a line of glue on the back of five sticks. Sandwich a piece of string between a glued stick and an unglued stick; clip them with clothespins to hold the glue securely. Let dry. Run glue along an unpainted craft stick, lay it horizontally and stick on the five strings as shown (don't let the sticks hang too low or they'll tangle in the wind). Top with another unpainted stick and add clothespins to hold the glue securely. Once dry, tie the strings together and cut off the excess. Hang outdoors and let the wind do its work.
Working on one side at a time, glue and nail the side to the back. Apply glue and drive three 1-5/8-in. nails into each shelf, attach the other side and nail those shelves into place to secure them. Clamps are helpful to hold the unit together while you’re driving nails. Center the top piece, leaving a 2-in. overhang on both sides, and glue and nail it into place. Paint or stain the unit and then drill pilot holes into the top face of each side of the unit and screw in the hooks to hold your ironing board. Mount the shelf on drywall using screw-in wall anchors.
Perfectly customizable for any home bar or kitchen, wooden coasters are incredibly easy to make and perfect for the beginner craftsman or craftswoman. All it really takes is some precise (or imprecise, depending on the style you wish to achieve) cuts, a little to a lot of sanding, a tiny bit of finish, and the optional design you want on the coaster.
We have helped thousands of general and specialty contractors of all types build stronger, more profitable businesses. Sign up for our free newsletter and receive advice and encouragement for your business. We offer affordable DVD training in estimating, sales and business management, along with estimating and proposal writing software that doesn’t cost an arm and a leg. Free Online Catalog for US addresses only.

Do you want to use an oil stain, a gel stain, a water-based stain or a lacquer stain? What about color? Our ebook tells you what you really need to know about the chemistry behind each wood stain, and what to expect when you brush, wipe or spray it on. It’s a lot simpler than you think! This is the comprehensive guide to all the varieties of stain you will find at the store and how to use them.
This rack can be built from old unused wood pallets you can find around the house. So it is also a great way to recycle those old pallets. You can also find a step by step tutorial at instructables.com for which I have included the source link below. This tutorial helps you to make a wood wine rack from the scratch. So what are waiting for? Just grab the items you need and start building a cool wooden rack for those nice wine bottles of yours.
Make It: Cut an oval from chipboard; paint it and three clothespins yellow. Add black paint to the tip of each clothespin as shown. Once the paint has dried, let your child use his fingertips to create brown paint spots all over the oval body and clothespin legs and neck. Clip the legs and neck onto the body and glue in place. Glue a yellow pom-pom face onto the neck and adhere a folded chenille stem along the back of the neck to complete the giraffe.
If you have a creative mind you can do much DIY arts with wood. Like this image, I use simple tree wood for decoration purpose. This looks really elegant and unique DIY wood art. Now it depends on you that you like the simple wood or wanted to paint the wood sample. I keep my decoration secure from children. It's hard to find a unique place for your showpiece. Like I put a decoration piece you can use the different one or same like me. There are a lot of ideas using simple wood. For more idea open this link.
This tutorial shows the making of a wooden bookshelf with one of the easiest ways. I make this wooden stylish bookshelf at home easily and decorate with the variety of books that give a fabulous look to my room. You can also make it by using basic tools like woodcutters, hammer, drill and measuring tape. I made it at home for my creativity in easy steps. It is actually very easy and interesting to make. Size, shape, design and number of shelving is according to your choice when you made it.
Making a garden arched footbridge out of some wood boards can be fun, hard working plan and also it’s quite rewarding. We are providing the project tutorial for how to build an arched footbridge without rails or having rails. If you take your hands of work and have some basic woodworking skills you can easily build this type of bridge. While this garden bridge is too small to walk over but it can make a really stunning addition to your lush yard or garden.
This time I surprised one of my favorite dice games and took it outside. I made a set of wooden dice in just a few hours, and instead of sitting in the room and doing nothing, we are taking our dice game out into the yard. With this set of wooden dice, dice games are becoming our favorite backyard game. Check out the step by step tutorial below so you can make your own.

This is definitely going to be one of the easiest woodworking projects you’ll be reading about today. So why not just get started? The tutorial link is given below. Just do exactly what they are saying in the tutorial and you will end up making a beautiful wooden doormat just like the one in the image above. They are using pine wood to build this doormat. You can choose any wood material that best suits your budget.
The best thing about the toy chest is that it is very easy to build. All you need is the basic understanding of woodworking and a few tools to get started. You can also modify your kid’s toy chest in any way you want or build in a different design or color different from the one pictured above. You can try some other designs for your plan in the below-mentioned link.
The free woodworking plans are sometimes very straightforward and easy, and sometimes only for someone with a high level of woodworking artistry. When you find something you'd like to build, print out the free project and instructions while they are still available. Make a point of checking the material lists before buying your building materials for accuracy.
But they had to start somewhere too right. If you’re looking to get into it, here some simple woodworking ideas that can get you started. There are a lot of cool projects about some easy wood ideas from wooden desks, shelves wooden clamps, trays and decorative articles to coffee table plans, rocking chairs wine holders, clocks, fences, wall designs, bird houses, cutlery, coasters and what not, that you can try as beginners and they tell you how to do it step by step.
Here, I am writing about another DIY project that involves the use of an old furniture piece. I think that the idea of reusing and recycling old furniture has got to me. Anyways, I am starting to love it. This project involves using an old door to build a beautiful multi picture frame, as you can see in the image below. This frame looks really wonderful and can be used to hold many pictures at a time.

Building a bookcase or bookshelf is a fairly simple woodworking plan that you can get done in just a day or two. This is also a low-cost project as well and since the project idea is free, you don't have to worry about busting through your budget. Just follow the simple steps in the tutorial and enjoy your own company building a simple bookcase on this weekend.
Woodworking is the art that gets you busy and you can do this activity in the leisure time. If you are new to the art of woodworking there is nothing to worry about. It is not so much difficult that you cannot learn. Remember, learning never stops. So, have the courage to start the art of woodworking and take your time out to learn it. Here I am sharing 20 woodworking projects with you, have a look at them in detail. I am sure you would get some good ideas for the woodworking projects of your home and office. With these woodworking projects, the beauty of your drawing and dining room would be enhanced. You should not lose hope while learning these woodworking ideas. By the time you would learn these projects very easily; if you work hard and concentrate, you can go for the further more complex projects.
Make It: Cut an oval from chipboard; paint it and three clothespins yellow. Add black paint to the tip of each clothespin as shown. Once the paint has dried, let your child use his fingertips to create brown paint spots all over the oval body and clothespin legs and neck. Clip the legs and neck onto the body and glue in place. Glue a yellow pom-pom face onto the neck and adhere a folded chenille stem along the back of the neck to complete the giraffe.
The one wooden item you surely should look to make yourself is this photo and print frame. I made these exciting photo frames and print frames and now my whole house is covered with them. You can also make these easy to make wooden photo and print frames and can hang them anywhere in your house. These wooden frames can be used for indoors as well outdoors.
Woodworking is a great stress-reliever, art and hobby. But it takes a skilled hand, a sharp eye and plenty of patience to fully master the fundamentals of building with woods creatively. And I must admit, the journey isn’t as easy as it seems. So, I started searching online the easy yet inexpensive woodworking projects for beginners and came up with 45 on the list which we will talk later.
In a nutshell, these are the 25 top small wood items that I like the most in my house or office. These projects are so easy that a professional woodworker can even build one while working on some other major wood project. Tell us if you enjoy the article. Have you tried any project from this list yet? Did you complete it? Please share your reviews, questions, and projects in the comments. I’d love to hear about your experiences with these small wood projects. Also, share this with more and more your woodworker friends.
At your home, there must be a proper place for keeping a guitar as you have to take it with you while going out. Normally you get desperate when you are not finding your guitar. You always have a fear of breaking that guitar. Have you ever heard about a guitar holder? I found this online it by myself because I was desperately finding a proper place for keeping my guitar. So, I am sharing some of the pictures with you. Have a look at them.

From the image above it seems that you do not require a big tutorial to help you to build this candle holder. All you need is a wood panel, a hook and some nails/screws and do exactly what you see in the picture. Attach the hook to the wood panel using two screws and then, attach the panel to the wall using more nails or screws. That’s it. I hope this gets the job done.

Now a day, it is not difficult to decorate your living places. We can decorate walls with beautiful and attractive wooden hangings. I am actually making one of this wooden plants hanging in my home. It is totally cool and creative work. We can make these eye-catching wooden plant hangings at home easily by using some common tools. This is the easiest way to spice up your walls. By doing this you can give style to your walls as well as mention your address on it.
Have you ever seen a calendar which is everlasting? In your home or office usually, you use such calendar which is made of paper and torn out after use. But this is the calendar that can never be outdated, as it is a wooden calendar and you can change the dates and months on it with your own will. At the cubical shape bars you can see there are the months’ names and on the square shape boxes, there are the numbers. I am sharing some of the pictures of this calendar. Have a look at them.
Woodworkers are a social bunch, and there are a few popular forums where people share thoughts on tools, discuss technique at length, and—of course—upload their plans. Some of the most active online woodworking communities include Lumberjocks, Woodworking Talk, Wood Magazine, WoodNet, Kreg, and Sawmill Creek. Search those to see if they have what you’re looking for (either with their built-in search tool or with Google’s site-specific search, e.g. site:lumberjocks.com side table).

In your home, you are always in search of a rectangle shaped rack. In this rack, you can keep your books and some other material inside. You can also keep a photo frame inside it. I found this online such type of a rack by myself to keep my things in a right place. This way, your valuable items and accessories cannot be misplaced. Let’s have a look at the pictures mentioned below.
The Saw Guy - Saw Reviews and DIY Projects Copyright © 2018. Copyright text 2018 by The Saw Guy - Saw Reviews and DIY Projects. TheSawGuy.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Full affiliate disclaimer here
You can also create different style and design for DIY wood art. I think continuously that what should I use further for decoration than the idea came into my mind that I must try wood shelves. The procedure of making wood shelves is given in this link you just need to open this link so that you can see the procedure of making wood shelve for decoration purpose.

I built my first platform bed by following the steps mentioned in the tutorial and the end result was everything I expected. It was as beautiful as comfortable and strong. It only cost me around $60 to build this one from the scratch. And if I can build it, anyone can. What you need is a little bit of woodworking experience and a lot of confidence. Collect the items as suggested in the video and start working now.


Whether you're new to woodworking or you've been doing it for years, Woodcraft's selection of woodworking projects is one the best places to find your next big project. Whether you're looking to make wooden furniture, pens, toys, jewelry boxes, or any other project in between, the avid woodworker is sure to find his or her next masterpiece here. Find hundreds of detailed woodworking plans with highly accurate illustrations, instructions, and dimensions. Be sure to check out our Make Something blog to learn expert insights and inspiration for your next woodworking project.
The engineering involved in building this garden bench is pretty simple, and we have provided some links to get a full cut list and plans with photos to help you along the way. Additionally, to the stock lumber, you will need wood screws, barrel locks, and hinges to complete the table. A miter saw or hand saw is also extremely helpful for cutting down your stock to the correct angle and length.

Woodworkers are a social bunch, and there are a few popular forums where people share thoughts on tools, discuss technique at length, and—of course—upload their plans. Some of the most active online woodworking communities include Lumberjocks, Woodworking Talk, Wood Magazine, WoodNet, Kreg, and Sawmill Creek. Search those to see if they have what you’re looking for (either with their built-in search tool or with Google’s site-specific search, e.g. site:lumberjocks.com side table).
Making an art or a design on a wooden piece is a hectic task and requires good art skills. But there is another much easier way to carve a beautiful art on any wood surface. For this, you will need the image or graphic that you want to transfer, a piece of wood, freezer paper, etc. I, myself have made several such designs. At the source below, you can find a step by step guide for transferring a graphic image to the wood.
×