The one wooden item you surely should look to make yourself is this photo and print frame. I made these exciting photo frames and print frames and now my whole house is covered with them. You can also make these easy to make wooden photo and print frames and can hang them anywhere in your house. These wooden frames can be used for indoors as well outdoors.
And the fact is that you can make your own patio chair with several old but still good pallets. Here we are providing a tutorial that everybody can follow easily – it is very well-written and also self-explanatory, which is great for those who are a beginner at woodworking and have never completed a DIY project before. As you don’t need to be a professional woodworker or a handyman to complete this project, so it is not a difficult task – all you need is a bit of determination!
Drill four 5/8-in.-dia. 1/2-in.-deep holes on the large disc?inside the traced circle?then use 5/8-in. dowel centers to transfer the hole locations to the underside of the small disc. Drill four 1/2-in.-deep holes on the underside of the small disc and a 1/2-in.-deep hole in the center of the top for the dowel handle. Glue in the dowels to join the discs, and glue in the handle. We drilled a wood ball for a handle knob, but a screw-on ceramic knob also provides a comfortable, attractive grip.
Begin by cutting off a 10-in. length of the board and setting it aside. Rip the remaining 38-in. board to 6 in. wide and cut five evenly spaced saw kerfs 5/8 in. deep along one face. Crosscut the slotted board into four 9-in. pieces and glue them into a block, being careful not to slop glue into the saw kerfs (you can clean them out with a knife before the glue dries). Saw a 15-degree angle on one end and screw the plywood piece under the angled end of the block.
I can decorate my favorite areas and corners of my house by placing stylish wooden book shelves. These wooden items give stylish look to my interior furnishing. You can also make a wonderful variety of wooden bookshelves easily at home. It is actually very stress-free and interesting to make. You must know you should have a bit of woodwork skills to do this innovative and stimulating work. All you need are a few pieces of wooden boards, wood cutter, electric drill, hammer, screws, and plates. You can easily make these wooden book racks by joining equal size wooden pieces of square shapes. You can also do easily.
This is one of those things that you never know you need unless you have one. This amazing wooden sofa sleeve works perfectly on either or both sides of a sofa set. It gives your sofa a nice look. The sleeve can also be modified to include a cup holder, mobile holder, etc. You can easily find this item on any online furniture store, but an even better idea is to build one. This way, you can make a sofa sleeve design that you actually like and make space for cup and other things.
To corral shelf-dwelling books or DVDs that like to wander, cut 3/4-in.-thick hardwood pieces into 6-in. x 6-in. squares. Use a band saw or jigsaw to cut a slot along one edge (with the grain) that’s a smidgen wider than the shelf thickness. Stop the notch 3/4 in. from the other edge. Finish the bookend and slide it on the shelf. Want to build the shelves, too? We’ve got complete plans for great-looking shelves here.
The step-wise process to make a simple, elegant and strong wooden cutting board is shown in the above-attached link. Follow the video and learn how to make a cutting board from wood. The things you would need to build a cutting board are just wooden and cuter. Build different shapes and sizes to make the cutting boards elegant. You can also paint the board and can make amazing designs and prints on the boards. Make yours today and ease the process of cutting.
We cut the supports 16 in. long, but you can place the second shelf at whatever height you like. Screw the end supports to the walls at each end. Use drywall anchors if you can’t hit a stud. Then mark the position of the middle supports onto the top and bottom shelves with a square and drill 5/32-in. clearance holes through the shelves. Drive 1-5/8-in. screws through the shelf into the supports. You can apply this same concept to garage storage. See how to build double-decker garage storage shelves here.
This is not exactly a tutorial, but a guide to some really cool woodworking projects. Although we are not teaching you to make anything, we are always here to help. Feel free to ask your queries in the comments in case if you face any issue while working on any of these projects. Also, tell us how much you liked this article. Did you enjoy reading it? Did you work on any of these projects, and if yes, how was your experience? You are also welcome to share any images of your completed woodwork projects.
TimberLine is a monthly trade magazine for the logging, sawmill, pallet, firewood and wood processing industries. Every month, TimberLine delivers information on machinery, safety, business opportunities, plant operations, company management, new products, general news, environmental issues and more. TimberLine helps readers learn about the latest technology, generate new business ideas, save $$$ on machinery/equipment and keep up with the latest breaking industry news.
I came across this wooden bottle crate just a few days ago. Quite easy to make, I am planning to make one for me to carry on parties and road trips. Building wooden items is not an easy task for normal people like you and me, however, it isn’t impossible. With proper care and learning, anyone can make wooden items. Practice your woodwork on this easy to carry bottle crate. This item can easily carry more than bottles and you can take it to any party or road trip easily.
Here’s a traditional Swedish farm accessory for gunk-laden soles. The dimensions are not critical, but be sure the edges of the slats are fairly sharp?they’re what makes the boot scraper work. Cut slats to length, then cut triangular openings on the side of a pair of 2x2s. A radial arm saw works well for this, but a table saw or band saw will also make the cut. Trim the 2x2s to length, predrill, and use galvanized screws to attach the slats from underneath. If you prefer a boot cleaner that has brushes, check out this clever project.