This is probably one the easiest woodworking projects you will find here. Although easy, a doormat is an equally important and useful item for households. As you can see in the image below, you will only need some 2X2 wooden boards and rope to build a simple doormat. This doormat is mostly useful for outdoor and porch. It will easily remove all the mud from your shoes with just one wipe. It is also very easy to clean and looks fabulous even if it is dirty.
In your kitchen, you really need a proper place to keep your knives. I found this online this knife stand with wood and it is very useful. You can keep your knives at a proper place by using this wall knife stand. A knife is a thing that you need repeatedly in the kitchen while making food. Especially for the ladies, it is very essential. I am sharing some of the pictures of this wall knife stand with you, have a look at them.
Perfectly customizable for any home bar or kitchen, wooden coasters are incredibly easy to make and perfect for the beginner craftsman or craftswoman. All it really takes is some precise (or imprecise, depending on the style you wish to achieve) cuts, a little to a lot of sanding, a tiny bit of finish, and the optional design you want on the coaster.
These indoor photo frames got my attention when I was searching to some good wooden wall hangings. Easy to make and exciting photo frames are must have to decorate your walls and rooms with amazing pictures of your favorite moments. You can make these photo frames easily and can attach them to any wall inside your house for decoration and can save a lot of memorable pictures of your favorite moments.
Wall-mounted or placed on a table or countertop, this handsome display cabinet is the perfect way to share any collection while keeping it clean and protected at the same time. Featuring tempered glass doors and three shelves, the cabinet’s design calls for all straight cuts and straightforward construction techniques (simple cut-outs give the effect of
Here’s a traditional Swedish farm accessory for gunk-laden soles. The dimensions are not critical, but be sure the edges of the slats are fairly sharp?they’re what makes the boot scraper work. Cut slats to length, then cut triangular openings on the side of a pair of 2x2s. A radial arm saw works well for this, but a table saw or band saw will also make the cut. Trim the 2x2s to length, predrill, and use galvanized screws to attach the slats from underneath. If you prefer a boot cleaner that has brushes, check out this clever project.
Always you find a proper place to keep your mobile and you don’t find it. To solve your problem I am introducing a mobile stand which is made of wood. You can connect your mobile to the charger by keeping the mobile on the stand as well as you would never miss your important calls. It is a very small stand, but it is very useful. I am sharing some of the pictures of such mobile stand. Just have a look at these pictures.

It really feels amazing to do woodworking at home. The unique style of presenting anything can attract anyone, so it depends on you that what style you are choosing for glass and bottle presenting. Different things can change the way of living so avoid boring life and start something creativity in your life. For me when I am bored I suddenly attract to doing a wood project. In this link, you can see another tutorial for making a wood, glass and a bottle holder.


Often in the morning you really need a good brush holder for your toothbrushes and razors to hold. No one wants that the toothbrushes remain without a brush holder. So I am introducing a new project which I found this online by myself and it’s a wooden brush holder having four holes inside. You can increase the holes, it depends on your demand. It is very useful as when you enter in the washroom your first need is the brush in the morning, so if you find it in a perfect brush holder it’s really amazing. I am sharing some of the pictures of different brush holders with you. Have a look at these pictures.

Drill four 5/8-in.-dia. 1/2-in.-deep holes on the large disc?inside the traced circle?then use 5/8-in. dowel centers to transfer the hole locations to the underside of the small disc. Drill four 1/2-in.-deep holes on the underside of the small disc and a 1/2-in.-deep hole in the center of the top for the dowel handle. Glue in the dowels to join the discs, and glue in the handle. We drilled a wood ball for a handle knob, but a screw-on ceramic knob also provides a comfortable, attractive grip.
×