There’s a lot of space above the shelf in most closets. Even though it’s a little hard to reach, it’s a great place to store seldom-used items. Make use of this wasted space by adding a second shelf above the existing one. Buy enough closet shelving material to match the length of the existing shelf plus enough for two end supports and middle supports over each bracket. Twelve-inch-wide shelving is available in various lengths and finishes at home centers and lumberyards.
We cut the supports 16 in. long, but you can place the second shelf at whatever height you like. Screw the end supports to the walls at each end. Use drywall anchors if you can’t hit a stud. Then mark the position of the middle supports onto the top and bottom shelves with a square and drill 5/32-in. clearance holes through the shelves. Drive 1-5/8-in. screws through the shelf into the supports. You can apply this same concept to garage storage. See how to build double-decker garage storage shelves here.
Make It: Have your child paint 10 craft sticks and allow them to dry. Put a line of glue on the back of five sticks. Sandwich a piece of string between a glued stick and an unglued stick; clip them with clothespins to hold the glue securely. Let dry. Run glue along an unpainted craft stick, lay it horizontally and stick on the five strings as shown (don't let the sticks hang too low or they'll tangle in the wind). Top with another unpainted stick and add clothespins to hold the glue securely. Once dry, tie the strings together and cut off the excess. Hang outdoors and let the wind do its work.
Through learning, you can make this simple and designing photo frames. I spent whole one week to learn the proper way to carve the ends and give it an attractive look but believe me it was worth it. A few weeks back when I searched this on the internet, I never thought I could make it until I started it and completed it in just hours. The carving took extra time, but besides that, it is easy to make. If I can make this, surely you can also. So make these interesting photo frames and hang them on your walls.
I hope you’re SO inspired by the simplicity of these projects, and have the confidence to go give one of them a try! You have NOTHING TO LOSE! Remember, even the most season woodworkers and carpenters started somewhere. So don’t dismay! And you can always ask me questions or tag me on social media to show me your projects! I’m @RealityDaydream on both Instagram and Facebook!
Here, I am writing about another DIY project that involves the use of an old furniture piece. I think that the idea of reusing and recycling old furniture has got to me. Anyways, I am starting to love it. This project involves using an old door to build a beautiful multi picture frame, as you can see in the image below. This frame looks really wonderful and can be used to hold many pictures at a time.
In your home, you are always in search of a rectangle shaped rack. In this rack, you can keep your books and some other material inside. You can also keep a photo frame inside it. I found this online such type of a rack by myself to keep my things in a right place. This way, your valuable items and accessories cannot be misplaced. Let’s have a look at the pictures mentioned below.
Begin by cutting off a 10-in. length of the board and setting it aside. Rip the remaining 38-in. board to 6 in. wide and cut five evenly spaced saw kerfs 5/8 in. deep along one face. Crosscut the slotted board into four 9-in. pieces and glue them into a block, being careful not to slop glue into the saw kerfs (you can clean them out with a knife before the glue dries). Saw a 15-degree angle on one end and screw the plywood piece under the angled end of the block.
×