We cut the supports 16 in. long, but you can place the second shelf at whatever height you like. Screw the end supports to the walls at each end. Use drywall anchors if you can’t hit a stud. Then mark the position of the middle supports onto the top and bottom shelves with a square and drill 5/32-in. clearance holes through the shelves. Drive 1-5/8-in. screws through the shelf into the supports. You can apply this same concept to garage storage. See how to build double-decker garage storage shelves here.
Make It: Have your child paint 10 craft sticks and allow them to dry. Put a line of glue on the back of five sticks. Sandwich a piece of string between a glued stick and an unglued stick; clip them with clothespins to hold the glue securely. Let dry. Run glue along an unpainted craft stick, lay it horizontally and stick on the five strings as shown (don't let the sticks hang too low or they'll tangle in the wind). Top with another unpainted stick and add clothespins to hold the glue securely. Once dry, tie the strings together and cut off the excess. Hang outdoors and let the wind do its work.

Have you ever heard a stairs shaped rack? It is a rack that you can differentiate from among a lot of racks. It would look very unique and elegant at your home. I have seen such rack in my friend’s home and decided to make such an amazing rack by myself. You can keep a lot of things inside it, as it has stairs so there is ample space in this rack. I am sharing some pictures of this rack, let’s have a look at these pictures you would be amazed to see them.


If you want some more stuff, you can get it through the internet, I am sharing some of the pictures of this wall planter for your help. On the internet, you can get a variety of pictures of this wall planter. You can get good ideas from there. You can select the wall planter from the pictures which you like the most. So, lets have a look at these pictures and start making your first project. It would be a great pleasure to start it.

It's really hard for me to put my art product in one place. I think continuously that what thing should be made to put things in one place than an idea comes into my mind that I must try to make something with the help of wood. I make art supply organizer by using the wood material. This is really helpful for me when I am doing any art and craft I put aside the supply organizer so that all things are found in place. To see the full image just click on this link
Slice, dice and serve in style on this easy, attractive board. We’ll show you a simple way to dry-fit the parts, scribe the arc and then glue the whole thing together. We used a 4-ft. steel ruler to scribe the arcs, but a yardstick or any thin board would also work. Find complete how-to instructions on this woodworking crafts project here. Also, be sure to use water-resistant wood glue and keep your board out of the dishwasher or it might fall apart. And one more thing: Keep the boards as even as possible during glue-up to minimize sanding later. For great tips on gluing wood, check out this collection.
×