You can decorate your favorite areas and corners of your house by placing stylish wooden vases. These wooden items give a classy look to your interior furnishing. You can also make a wonderful variety of wooden vases easily at home. It is actually very easy and interesting to make. You must know you should have a bit of woodwork skills to do this innovative and exciting work. All you need are a few pieces of wooden boards, wood cutter, electric drill, hammer, screws, and plates. You can easily make these hanging wooden pots by joining equal size wooden pieces of square shapes. You can also do easily. This creative project is entertaining as well as good activity at the same time.
Nightstands are nearly almost as important as the headboard of a mattress when it comes to a bedroom. They are absolutely perfect for placing lamps and novels for that late night reading, an alarm clock to remind you when it should be time to start your day, and for that nice, coaxing mug of sleepy time tea when you decide it is time to start winding down.
Another wooden item that you should have in your own house is this DIY wooden Dog food table. Not so difficult to make, I made one for my dog and he is very happy after getting a treat from me. Believe it or not, this wooden dog food table has made my life easier and both dog and I are happy to get it. If you are a dog owner, this is a must have a wooden item and buying one would cost extra pennies.
Here’s a traditional Swedish farm accessory for gunk-laden soles. The dimensions are not critical, but be sure the edges of the slats are fairly sharp?they’re what makes the boot scraper work. Cut slats to length, then cut triangular openings on the side of a pair of 2x2s. A radial arm saw works well for this, but a table saw or band saw will also make the cut. Trim the 2x2s to length, predrill, and use galvanized screws to attach the slats from underneath. If you prefer a boot cleaner that has brushes, check out this clever project.
Attention: Almost any do-it-yourself project involves risk of some sort. Your tools, materials, and skills will vary, as will the conditions at your project site. Reality Daydream has made every effort to be complete and accurate in the instructions of the plans on this website. Reality Daydream will not assume any responsibility or liability for damages or losses sustained or incurred in the course of your project or in the use of the item you create. Always follow the manufacturer's operating instructions in the use of tools, check and follow your local building codes, and observe all commonly accepted safety precautions.
With a pencil and a protractor, divide the larger disc into 30-degree wedges to create 12 center lines for the bottle indents. Center and trace the smaller disc on top of the larger disc. Next, with a drill press, drill 3/8-in.-deep holes on the 12 center lines with the 1-7/8-in. Forstner bit, spacing them between the disc’s outer edge and the traced circle. Next, divide the smaller disc into 60-degree wedges and drill six more 3/8-in.-deep holes with the Forstner bit.